Home Epoxy Coating ScarfingPrevious | NextCutting
05 / 03 / 99 All parts cut are coated with epoxy. I used System 3 epoxy applied with a foam roller.

I used their fast hardener. It worked well year round. The only time that I needed more time was on a slow job (like plugging a lot of holes) in the summer. Then I would try to mix as little as possible to adjust for the short pot time.
05 / 03 / 99 Notice the bottom is scarfed together and being used for a table. Any pieces requiring glass were given 1 coat of epoxy like this first so that the wood would not absorb to much epoxy from the glass.
05 / 03 / 99 The keel is coated also.  You can see the deadwood here.